Westgate OPT-SCX-TBAR Led Recessed Mounting with T-Bar Installation 120~277V
Add this option to the fixture and 1/2” wide flanges will be installed on the two long sides of the fixture. The two ends of the fixture will fall onto the t-bar grids and will be supported this way. The t-bar tiles on the two sides of the fixture must be cut to allow for the width of the fixture. The tiles will fall onto and be supported by the flanges on both sizes of the fixture. If you plan to support the fixture by the grids on three sides and tile on one side, call us or specify on your po and flange will be installed only on one side of the fixture. To provide safety and support from the beams above the t-bar ceiling order 10ft or 20ft aircraft suspension kits below.
SPECIFICATIONS : DOES NOT INCLUDE FIXTURE JUST A T-BAR MOUNTING OPTION
SCX-2FT-20W-30K-D (2-FT FIXTURE)
SCX-4FT-40W-30K-D (4-FT- FIXTURE)
Voltage: 120~277VAC/50~60 Hz
Power factor: >0.95
Low profile design
aluminum T-Bar housing with matte white finish
Diffuser is snapped into housing
Driver (Class II/P driver) disconnect provided where required to comply with US codes.
Make different connection via T/L/X joints on both ends .
Mounting options: surface, suspended, wall, recessed
Operating temperature: -13°F ~ 104°F
IP Rating: IP20
LIGHTING & WARRANTY:
Dimming: 0~10 Dimmable
Lens: Opal Polycarbonate Lens
Total lumens: 6720LM/6900LM/7080LM/7260LM
Color temperature: 3000K/3500K/4000K /5000K
Color rendering index: >80
Wide Beam angle
DLC qpl Certified
Warranty : 5 years
Linear Lighting can be customized to your desired length, look & color temperature and can either be suspended, surface, mounted or recessed to suit your needs. Ideal for Storage rooms, Offices Conference rooms, Retail Reception areas, Hallways Education facilities, hotel, restaurants.