Nora Lighting NHIOICD-220LE4 2 Inch Iolite High Lumen IC Air-Tight New Construction Housing 2000lm
Nora Lighting NHIOICD-220LE4
NHIOICD-220LE4 Product Description
Iolite dedicated LED New Construction housing for use in insulated ceilings can be in direct contact with insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows for easy, tool-less removal of the driver.FEATURES :
· IC rated for direct contact with insulation**· Quick connect provided for electrical connection to the LED reflector
· ASTM E283 for Air-Tight
· Patented driver assembly
SPECIFICATION :
Housing:
0.040” Aluminum housing with patented driver assembly, allows for driver to slide out without tools. Housing can be installed in 1/2” ceiling thickness, an extension collar is available for ceiling thickness up to 2”, must specify NIO-2EXTC2. Housing allows for access through top plate, for driver maintenance/installation above ceiling.
Air Flow Restriction:
Meets requirments of Air-Tight (AT) <2CFM (cubic feet per minute) in accordance with ASTM283 Air-Tight requirements.
Clearance**:
“IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.
Bar Hangers:
Two 13-3/4” to 24-1/2” adjustable bar hangers with captive nails are included on housing. Bar hanger brackets are parallel to junction box, but can be repositioned 90˚ perpendicular to junction box if desired. “L”-shaped bar hanger foot to align to bottom of construction joist. A T-bar notch allows for easy installation in a suspended ceiling.
Junction Box: Pre-wired 25 cubic inch 0.064” thick galvanized steel, with seven 1/2” knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire,
the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out). Access above ceiling required.