Nora Lighting NHIOICD-16LE3/PEM 1 Inch Iolite Dedicated New Construction IC Air-Tight Housing 600lm
NHIOICD-16LE3/PEM
Nora Lighting NHIOICD-16LE3/PEM
NHIOICD-16LE3/PEM Product Description
Dedicated LED New Construction housing for 1″ Iolite reflectors. New construction housing is rated for use in insulated ceilings and can be in direct contact with insulation. Air-tight construction provides energy savings by reducing the flow of air through the ceiling. Patented design allows for easy, tool-less removal of the driver.FEATURES :
· IC rated for direct contact with insulation**· Quick connect provided for electrical connection to the LED reflector
· ASTM E283 for Air-Tight
· Dimming down to 5%
· Patented driver assembly
SPECIFICATION :
Housing:
0.040” Aluminum shallow housing with patented driver assembly, allows for driver to slide out without tools. Housing can be installed in 1/2" ceiling thickness, an extension collar is available for ceiling thickness up to 2", must specify NIO-1EXTC2.
Air Flow Restriction:
Meets requirments of Air-Tight (AT) <2CFM (cubic feet per minute) in accordance with ASTM283 Air-Tight requirements.
Clearance**:
“IC” Insulated ceiling housings are direct contact rated. Not to be used in direct contact with spray foam insulation.
Bar Hangers:
Two 13-3/4” to 24-1/2” adjustable bar hangers with captive nails are included on housing. Bar hangers are parallel to junction box, but can be repositioned 90˚
perpendicular to junction box if desired. “L”-shaped bar hanger foot to align to bottom of construction joist. A T-bar notch allows for easy installation in a suspended ceiling.
Junction Box:
Pre-wired 25 cubic inch 0.064” thick galvanized steel, with seven 1/2” knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out). Access above ceiling required.
ACCESS ABOVE CEILING REQUIRED.