Lutron LRF2-OCR2B-P-WH Radio Power Saver Wireless Ceiling-Mounted Sensor

Please call us at 877-487-4444 to purchase this product or email us at buyriteelectric@gmail.com

LutronR Radio Powr SavrT occupancy/vacancy sensors are wireless, battery-powered passive infrared (PIR) sensors that automatically control lights via RF communication to compatible dimming and switching devices. These sensors detect the heat from people (IR radiation of 9.5 μm) moving within an area to determine when the space is occupied. ThE sensors then wirelessly transmit the appropriate commands to the associated dimming and switching devices to turn the lights on or off automatically. They combine both convenience and exceptional energy savings potential along with ease of installation.

FEATURES:

Wireless occupancy sensor has 3 settings available: Auto-On/Auto-Off, Auto-On Low-Light/Auto-Off, and Manual-On/Auto-Off
Auto-On Low-Light feature will only turn lights on automatically if there is less than approximately 10 Lux (1 fc) of ambient light
Vacancy only model available to meet California (U.S.A.) Title 24 requirements
Uses Clear ConnectR technology
Passive infrared motion detection with exclusive LutronR XCTTM Technology for fine motion detection
360˚ coverage ranges from 324 ft2 (30.2 m2) to 676 ft2 (62.4 m2), depending on mounting height
Simple and intuitive adjustments available for Timeout, Auto-On, and Activity settings
Supports advanced occupancy features, such as dependent occupancy groups and customizable
occupied/unoccupied presets in some systems
Multiple sensors can be added for extended coverage—refer to product specification submittal of receiving device to determine system limits
Lens illuminates during test mode to verify ideal locations
Multiple ceiling-mount methods available for different ceiling materials
Front accessible test buttons make programming easy
10-year battery life design
RoHS compliant

SPECIFICATIONS:

Operating voltage: 3 V-
Operating current: 14 μA nominal
Requires one CR 123 lithium battery
10-year battery life
Non-volatile memory (saved changes are stored during power loss)
Temperature: 32 ˚F to 104 ˚F (0 ˚C to 40 ˚C)
For indoor use only
Range: LRF2-, LRF5-, LRF7- Local load controls must be located within 60 ft (18 m) line of sight, or 30 ft (9 m), through walls, of a sensor.
LRF6- Local load controls must be located within 40 ft (12.2 m) line of sight or 23 ft (7 m), through walls, of sensor.
Sensor Coverage Test:
Front accessible test button
Lens illuminates orange in response to motion during test mode and is visible from 60 ft (18m)
Wireless Communication Test:
Front accessible test button
Turn associated loads on and off
Timeout Options:
1 minute
5 minutes
15 minutes – default setting
30 minutes