This alarm uses ionization sensing technology. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms. Kidde strongly recommends that both ionization and photoelectric smoke alarms be installed to help insure maximum detection of the various types of fire that can occur within the home.
Front battery pull tab allows battery activation without removing alarm from mounting bracket.
Large mounting base makes mounting easier, protects surface paint from dirt and covers imperfections.
Pre-stripped wiring harness with easy off cap does not require stripper tool. Tinned strands increase conductivity and wire nut grip.
One button design for easy operation and less confusion. Operates Hush™ and alarm test .
Battery run down protection will shut down alarm memory when AC power is not present, reducing low battery chirp.
Dust cover protects sensor from contaminates during construction reducing nuisance alarms .
Safety Light illuminates the path to safety.
Tamper resist locking feature deters alarm theft.
Alarm memory flashes red LED indicating which unit was the initiating alarm in interconnected system.
Battery backup provides protection in case of power failure .
Inter connectable with up to 24 devices (of which 18 can be initiating) including smoke, CO and heat alarms. See user’s guide for complete instructions .
Power Source: 120VAC (80mA), 60HZ, 9V battery backup
Audio Alarm: 85dB at 10ft
Temperature Range: 40˚F (4.4˚C) to 100˚F (37.8˚C)
Humidity Range: 5%-95% relative humidity (RH)
Size: 5.6” in diameter x 1.55” depth
Interconnects: Up to 24 Kidde devices
LED: Green, receiving AC power, Red, 4 modes of operation
Warranty: 10 year limited warranty