PLC Multipoint PP-950-D2

PP-950-D2 Product Description

A received wireless message indicating occupancy from one or more wirelessly linked sensors will trigger the pack’s integrated relay to close. When configured for Vacancy operation, an ON switch message is required from a wirelessly linked wall station to initially trigger lights. Once closed, line voltage will flow through the relay and turn on the connected lighting load. The wireless power pack maintains a master time delay that is reset every time a linked sensor reports occupancy. Lights will be switched off once there hasn’t been an occupancy message reported for the duration of the time delay. If linked to a photocell, the unit receives light level readings and controls connected lighting according to its photocell operating mode

Specifications:

ELECTRICAL
OPERATING VOLTAGE
120/277 VAC,
Single Phase, 50/60 Hz
CLASS 2 POWER OUTPUT
18 VDC @ 70 mA (-AX version),
higher output when unloaded
LOAD RATINGS
20A @ 120 VAC -
General Purpose Plug Load
20A @ 120/277 VAC -
General Purpose, Tungsten,
Magnetic Ballast
16A @ 120/277 VAC -
Electronic Ballast, LED Driver
DC LOAD RATINGS
20A @ 28 VDC (MAX)
1A @ 5 VDC (MIN)
DIMMING LOAD
(Models with -D2 option only)
50mA, (0-10 VDC ballasts or
drivers compliant with IEC 60929
Annex E.2)
MOTOR LOAD
1 HP
ESD IMMUNITY
Tested to withstand electrostatic
discharge without damage or
memory loss

WIRELESS
RANGE
80’ line of site w/o obstruction
40’ with obstruction (walls/floors)
FREQUENCY
915 MHz ISM Band
WIRELESS LINKING
Simple 3 sec. Push Button Process
SECURITY
All Wireless Data is Encrypted

PHYSICAL
SIZE
3.00” H x 2.25” W x 1.88” D
(7.62 cm x 5.72 cm x 4.78 cm)
WEIGHT
6.00 oz.
COLOR
Blue
MOUNTING
1/2” Knockout
TEST / PROGRAMING BUTTON
LED STATUS INDICATOR
Bi-color White & Blue

ENVIRONMENTAL
OPERATING TEMP
32°F to 122°F (0°C to 50°C)
RELATIVE HUMIDITY
0-95% Non-Condensing
Indoor Use Only

OPERATION
OPERATING MODES
Occupancy & Vacancy
Partial On/Off (-D2 option)
Daylight Harvesting (-D2 option)
On/Off/Inhibit Photocell
TIME DELAY OPTIONS
1, 5, 10, 15, 20, 30 min

CODE COMPLIANCE
These power packs can be used to
meet ASHRAE 90.1, IECC, & Title
24 energy code requirements

Features:

Wirelessly Links to Sensors, Photocells, & Wall Stations
Links in Seconds up to 50 Remote Devices
Switches Up to 20A Line Voltage Loads
Electronically Timed Switching Ensures Long Relay Life
Integrated Test/Programming Button
Plenum Rated (UL 2043)
Configurable Time Delays and Operational Modes (e.g. Occupancy/Vacancy)
Configurable Daylight Harvesting & Photocell Modes
Optional 0-10V Dimming Output for Partial On & Partial Off Operation
Optional Wired Connectivity to Low Voltage Sensors & Wall Stations

About PLC Multipoint:

For more than 30 years, PLC Multipoint has been making a name for itself as a creator and producer of the industry's finest lighting sensor controls and has earned a reputation as the go-to resource for solving the most complex lighting control challenges. PLC Multipoint’s product families include lighting control systems and daylighting sensors for a wide variety of applications.

Please email us with the products you need and the details of your job at buyriteelectric@gmail.com