Kidde KN-COB-LP2
KN-COB-LP2 Product Description
The Kidde battery-operated carbon monoxide alarm utilizes sophisticated electronic components to protect you and your family from the dangers of carbon monoxide. This alarm includes a slide-out battery door that gives immediate access to the batteries and a safety feature that makes it difficult to close the door without the batteries being installed. The inside cover of the battery door features a quick reference guide for what to do in case of an alarm. This easy-to-install alarm is suitable for all living areas and has a 10-year life and a 10-year limited warranty.Specifications:
Model: KN-COB-LP2Power Source: 2 AA Batteries
Sensor: Electrochemical
Audio Alarm: 85dB at 10ft
Temperature Range: 40ΛF (4.4ΛC) to 100ΛF (37.8ΛC)
Humidity Range: 5%-95% relative humidity (RH)
Size: 4.5βL x 2.75βH x 1.5β D
Weight: 5lb
Warranty: 10 year limited. 10-Year warranty
Features:
Battery Operated (2AAβs included) β Provides protection during power outage.Low Battery Hush - Silences low battery chirp warning for up to 12 hours in order to maintain protection without having to replace the batteries at an inconvenient time.
Battery Lockout System β Deters covering battery compartment without installation of batteries.
Event Memory - If the unit has detected CO concentrations of 100ppm or greater, the green LED will flash every ten seconds.
Slide-out Battery Door Cover β Gives immediate access to batteries.
Test/Reset Button β Tests the unit for proper operation. Resets the Carbon Monoxide Alarm
Low Battery Signal β Alerts user when the battery needs to be replaced.
Green LED β Flashes every 60 seconds to indicate the unit is operating properly. The green LED will also flash before a CO reading is taken and when any button is pressed.
Red LED β When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every minute until the device is reset or the CO is eliminated.
