Siemens QG220 20-Amp Two Pole BG Switch Neutral Breaker
Switching neutral breakers are used when all conductors are required to be disconnected. There is an additional pole connected to each switching neutral breaker that provides a means of disconnecting the neutral when the breaker is tripped or open. The...
$75.00
Add to Wish List
Siemens WEPK2211 200 Amp 2 Gang Meter Uni-Pak 2 Meter Position, EUSERC Approved
Siemens WEPK2211 200 Amp 2 Gang Meter Uni-Pak 2 Meter Position, EUSERC Approved WEPK2211 Twin Meter Main Panel Uni-PAK EUSERC Compliant 2 Position Meters Uni-PAK 2-Gang Tenant Main Breaker 200A Buss Rated 125A Branch Rating 120/240V 1 Phase 3 Wire...
$1,100.00
Add to Wish List
Siemens NBK01A Stick-on Numbers 1 Thru
Siemens NBK01A NBK01A Product Description Stick-on 1 inch ( & ) 1/2 inch high numbers 1 thru 60. Used for P1 circuit numbering and other applications. Specifications:  Brand SiemensApplications For P1 Circuit Numbering and Other ApplicationsType Stick OnStandard Packaging Qty 1/Pack...
$7.50
Add to Wish List
Siemens HF365R 400 Amp Outdoor, Fusible, 600V, Heavy Duty Safety Switch 3 Pole
Siemens HF365R HF365R Product Description HF365R, Siemens, VBII Series, type HF, disconnect, heavy duty safety disconnect switches, 3PH, 3P, 3 wire, 600V, 400A, 200kA@600V, nema 3R, fusible type, accepts class R fuses, Single style, suitable for outdoor use, disconnect safety...
$2,350.00
Add to Wish List
Siemens GNF321RA 30 Amp Outdoor, Non Fusible, General Duty Safety Switch 3 Pole
Siemens GNF321RA GNF321RA Product Description GNF321RA, Siemens, GNF Series, type GNF, non-fusible disconnect switch, 3PH, 3 wire, 3P, 240V, 30A, NEMA 3R outdoor enclosure, Single style Features: New compact sizes for improved space efficiencyNew oversized lugs for maximum wire range...
$88.25
Add to Wish List
Siemens Q23050CT2 One 30-Amp Two Pole One 50-Amp Two Pole Standard Breaker
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the...
$70.00
Add to Wish List
Siemens MBK200 200-Amp Two Pole Main Circuit Breaker for EQ Type Load Centers
Siemens main breaker kits are used as a replacement main breaker in Siemens type EQ load centers. Type EQ load centers were produced prior to 2002. Check the load center wiring diagram for confirmation, the MBK200 is the equivalent to...
$550.00
Add to Wish List
Siemens Q21540CT One 40-Amp Two Pole and Two 15-Amp Single Pole Standard Breaker
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the...
$56.00
Add to Wish List
Siemens Q150 50-Amp Single Pole Type QP Circuit Breaker
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home's electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution,...
$7.00
Add to Wish List
Siemens Q330 30-Amp Three Pole Standard Breaker 240V
Circuit breakers are intended for switching and protection of your home's wiring from high temperatures caused by excess current higher than the rating of the wire. While thermal-magnetic circuit breakers are the key element for overload and short-circuit protection of...
$70.00
Add to Wish List
Siemens Q250 50-Amp Two Pole Type QP Circuit Breaker
Siemens offers a wide array of thermal-magnetic circuit breakers that are the key element for overload and short-circuit protection of your home's electrical system. To provide additional protection Siemens offers circuit breakers to protect against severe electrical shock or electrocution,...
$15.45
Add to Wish List
Siemens QA120AFC 20-Amp Single Pole Plug-On Combination AFCI Breaker 120V
The Combination Type AFCI differs from the Branch/Feeder AFCI in its ability to detect series arcing faults. The Branch/Feeder AFCI can only detect line-to-neutral and line-to-ground arcing faults. Combination AFCIs provide protection against the high-energy parallel (line-to-neutral and line-to-ground) arcing...
$50.50
Add to Wish List
Siemens WEP4411 PAK Metering, 400 Amp, 4 Gang, 1 Phase, 125 Amp 4 Jaw, Ringed, EUSERC
Siemens WEP4411 Low Voltage's Multi-Family Metering Line of PAK Metering: EUSERC as part of the PAK Metering: EUSERC Group. Type: UNI-PAK Features: NO BYPASS EUSERC CERTIFIED Appn: GARDEN - STYLE Std: UL-50,67,414 V. Rating: 120/240V A. Rating: 400A Phase: 1PH...
$4,800.00
Add to Wish List
Siemens HNF362RH 60 Amp Outdoor, Non-Fusible, 600V, Heavy Duty Safety Switch 3 Pole
Siemens HNF362RH HNF362RH Product Description Siemens Low Voltage Circuit Protection Heavy Duty Safety Switch. 3-Pole Non-Fused in a type 3R enclosure (outdoor). Rated 600VAC (60A). Special features: height reduced enclosure. Features: Quick-make, Quick-break operating mechanism that ensures positive operationVisible blade,...
$315.00
Add to Wish List
Siemens GNF221A 30 Amp Indoor, Non-Fusible, General Duty Safety Switch 2 Pole
Siemens GNF221A GNF221A Product Description   General Duty Safety Switches are intended for applications where reliable performance and continuity of service are needed. But where duty requirements are not severe and usual service conditions prevail. These switches are intended for use...
$42.50
Add to Wish List
Siemens Q380 80-Amp Three Pole Standard Breaker 240V
Siemens type QP three pole breaker is rated for 80 Amps and 120/240 Volts. This breaker has a 10 KAIC interrupt rating and is for use in Siemens panels only. The breaker is plug in style. Siemens strongly recommends against...
$99.00
Add to Wish List
Siemens D250 50-Amp QO Replacement Two Pole Circuit Breaker
Siemens QO replacement breakers are UL listed for use in Square D QO brand load centers and are ideal for replacement of existing breakers or if expansion circuits are required. These 3/4-Inch breaker snap on to the QO type bussing....
$35.00
Add to Wish List
Siemens D160 60-Amp QO Replacement Single Pole Circuit Breaker
Siemens QO replacement breakers are UL listed for use in Square D QO brand load centers and are ideal for replacement of existing breakers or if expansion circuits are required. These 3/4-Inch breaker snap on to the QO type bussing....
$23.00
Add to Wish List
Siemens QSA2020SPD Two 20-Amp Single-Pole Type QP Surge Protection Circuit Breaker
Siemens SPD device provides whole house surge protection. This device takes up the space of two standard single pole breakers, but also includes two single pole breakers so you do not lose any space in your Load Center. Once connected...
$175.00
Add to Wish List
Siemens Q22040CT 40-Amp Two Pole and Two 20-Amp Single Pole Standard Breakers
Siemens space saving, plug in circuit breakers are intended for use in Siemens EQ, Siemens Ultimate, ITE, and Gould load centers and meter combinations that are rated to accept type QT breakers. Check wiring diagram to confirm. To ensure the...
$55.00
Add to Wish List
Siemens Q2150B 150-Amp Four-Pole Type QPP 10kA Bolt-on Circuit Breaker
Siemens type QPP, QPPH, and HQPP breakers are intended for use in Siemens panels and multi-family metering products where specified. Check the panel's wiring diagram for acceptance. Siemens strongly recommends against the use of "used" breakers. The installation of used...
$285.00
Add to Wish List
Siemens QA120AF 20-Amp Single Pole Plug On Branch Feeder Style AFCI Breaker 120V
Provides ARC fault, overload and short circuit protection. Required for receptacles in bedrooms effective January 1, 2002. UL listed and meets 1999 NEC Section 210-12. Protects against worn electrical insulation or damaged wire, misapplied or damaged plug in appliances and...
$48.50
Add to Wish List
Siemens QA115AFC 15-Amp Single Pole Plug-On Combination AFCI Breaker 120V
The Combination Type AFCI differs from the Branch/Feeder AFCI in its ability to detect series arcing faults. The Branch/Feeder AFCI can only detect line-to-neutral and line-to-ground arcing faults. Combination AFCIs provide protection against the high-energy parallel (line-to-neutral and line-to-ground) arcing...
$48.50
Add to Wish List
Siemens QF120A 20 Amp Single-Pole GFCI Circuit Breaker 120V
Testing GFCIs and afcis on a monthly basis is a good idea that is sometimes forgotten. Underwriters laboratories (UL) suggests that afci/GFCI Devices be tested every 30 days after installation to ensure they are properly working. Now the new self...
$52.00
Add to Wish List

About Siemens Circuit Breakers

Siemens offers a variety of low and medium-voltage electrical breakers for new constructions or renovation projects across the USA. Here’s a list of fuse breakers from Siemens:

Show More

Frequently Asked Questions

  • 1. Are these original Siemens breakers?

    Yes, absolutely. We are an authorized Siemens distributor in the U.S.A. Our products are genuine and sourced from the original manufacturer only.

  • 2. What types of Siemens breakers do you supply?

    At Buy Rite Electric, we supply a variety of Siemens residential breakers, including 1. Residential Circuit Breakers 2. Instantaneous Magnetic-Trip-Only Circuit Breakers 3. Thermal-Magnetic Circuit Breakers 4. Interchangeable Trip Circuit Breakers 5. General Duty Safety Switches We also stock Siemens QT and QP, QAF, QPF, QT, and QP breakers. Have a question? Contact us

  • 3. What is Siemens warranty?

    Most Siemens electrical switches come with one year of warranty. Please read the product description before purchasing.

  • 4. Are Siemens breakers expensive?

    Siemens is a global brand, manufacturing high-quality and reliable circuit breakers. They may not be cheap but with Buy Rite Electric, you get the most competitive deals on the market. We stand by our 110% low price guarantee. This means if you find a lower advertised price on any item you purchase from our site within a month after your purchase, let us know. We will happily match their price, then beat it by 10% of the difference.

  • 5. Do you offer Siemens ITE breakers?

    Yes, most of our Siemens breakers are ITE-compatible.

  • 6. Do you have Siemens quad breakers in stock?

    Yes, if you're looking for a Siemens quad breaker simply use the search box and you’ll be able to find the right model and specifications.

You have successfully subscribed!