Nora Lighting NHMIC-585CLE2 5" Marquise I Comfort Dim Air-Tight New Construction Housing 277V Input; 0-10V dimming;Comfort Dim
2 sold in last 8 hours
customers are viewing this product
NORA Lighting NHMIC-585CLE2
NHMIC-585CLE2 Product Description
Dedicated new construction housing for installation in Non-IC or insulated ceilings, must specify. Air-tight construction provides energy savings by reducing the flow of air through the ceiling.
Plaster Frame: 0.040 steel frame with integral bar hanger brackets. Brackets can accommodate longer 27” accessory flat bar hangers. Brackets run along all sides of frame to allow bar hangers to be run parallel or perpendicular to junction box.
Housing: 0.040 aluminum one-piece can. Housing adjusts for ceiling thickness from 1/2” to 1-1/4”.
Air Flow Restriction: Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2CFM (cubic feet per minute) in accordance with ASTM-283 Air-Tight requirements.
Bar Hangers: Two 13-3/4” to 24-1/2” adjustable bar hangers with captive nails are included on frame. Bar hangers are parallel to junction box, but can be repositioned 90º perpendicular to junction box if desired. “L” Shaped bar hanger foot to align to bottom of construction joist. A T-Bar notch allow for easy installation in a suspended ceiling.
Junction Box: Prewired 25 cubic inch 0.064” thick galvanized steel, with seven 1/2” knockouts, four Romex® pryouts, and snap on covers. All leads are #18AWG wire, the ground wire is connected to the bottom, and quick connectors are supplied on all leads. Through branch circuit wiring, (4-in, 4-out).
Non-IC: Non-Insulated housings require a minimum clearance of 3” from thermal insulation and 1/2” from adjacent building components.
IC: Insulated ceiling housings are direct contact rated; no minimum clearance is required.
Input Voltage: 120V or 277V
Operating Temp.: 0˚C to 45˚C ambient temperature
Lumens / Wattage: NHMIC-585 = 850lm / 11W; NHM-512 = 1250lm / 16W; NHM-520 = 2000lm / 26W
Dimming: ELV or 0-10V dimming
Emergency LED Driver (BSL17C-C2)
Up to 7.5W emergency illumination with LEDs.
Illumination Time: 90min
Voltage: 120/277 VAC, 60Hz
Output Voltage: 15.0-50.0 VDC
Available with remote test switch, must specify
LABELS AND LISTINGS
cULus Listed for Damp Location w/ Feed Through (Wet Location when used with compatible reflector)
5-Year Limited Warranty
Meets or exceeds ASTM-283 Air-Tight Requirements
Emergency LED Driver meets Title 20 CEC efficiency standards
About Nora LightingAfter stepping into the lighting game just a little over 20 years ago, Nora lighting has sprinted its way to the top of light fixture suppliers. With a team of the most hip design experts and engineering technologies Nora lights can add a modern, yet dependable edge to your home, job, or college dorm. Nora track lighting and recessed lighting are amongst the best available. So why not play it stylish and smart and go with Nora lighting?
Have Questions?Ask a BuyRite Electric Expert
Please email us with the products you need and the details of your job at firstname.lastname@example.org