{"title":"SensorWorx — Wall Switch Sensors","description":"\u003cp\u003eShop SensorWorx Wall Switch Sensors at BuyRite Electric.\u003c\/p\u003e","products":[{"product_id":"sensorworx-swx-103-1-gy-wall-switch-sensor-pir-manual-on-stand-alone-12-24v-gray","title":"SensorWorx SWX-103-1-GY Wall Switch Sensor - PIR - Manual On - Stand Alone - 12 - 24V- Gray","description":"\u003ch1\u003eSensorWorx SWX-103-1-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-1-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-103-1-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003c\/p\u003e\n\u003cp\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40704998539367,"sku":"SWX-103-1-GY","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-103-1-GY.jpg?v=1714144860"},{"product_id":"sensorworx-swx-101-wh-wall-switch-sensor-pir-1-pole-auto-on-120-277v-white","title":"SensorWorx SWX-101-WH Wall Switch Sensor - PIR - 1-Pole - Auto On - 120-277V - White","description":"\u003ch1\u003eSensorWorx SWX-101-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-101-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705025441895,"sku":"SWX-101-WH","price":49.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-WH.jpg?v=1714145385"},{"product_id":"sensorworx-swx-101-iv-wall-switch-sensor-pir-1-pole-auto-on-120-277v-ivory","title":"SensorWorx SWX-101-IV Wall Switch Sensor - PIR - 1-Pole - Auto On - 120-277V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-101-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-101-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705050509415,"sku":"SWX-101-IV","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-IV.jpg?v=1714145861"},{"product_id":"sensorworx-swx-101-la-wall-switch-sensor-pir-1-pole-auto-on-120-277v-light-almond","title":"SensorWorx SWX-101-LA Wall Switch Sensor - PIR - 1-Pole - Auto On - 120-277V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-101-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-101-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705077543015,"sku":"SWX-101-LA","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-LA.jpg?v=1714146539"},{"product_id":"sensorworx-swx-101-gy-wall-switch-sensor-pir-1-pole-auto-on-120-277v-gray","title":"SensorWorx SWX-101-GY Wall Switch Sensor - PIR - 1-Pole - Auto On - 120-277V - Gray","description":"\u003ch1\u003eSensorWorx SWX-101-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-101-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705138786407,"sku":"SWX-101-GY","price":49.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-GY.jpg?v=1714147352"},{"product_id":"sensorworx-swx-103-wh-wall-switch-sensor-pir-1-pole-manual-on-120-277v-white","title":"SensorWorx SWX-103-WH Wall Switch Sensor - PIR - 1-Pole - Manual On - 120-277V - White","description":"\u003ch1\u003eSensorWorx SWX-103-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-103-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705153532007,"sku":"SWX-103-WH","price":49.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-103-WH.jpg?v=1714147713"},{"product_id":"sensorworx-swx-103-iv-wall-switch-sensor-pir-1-pole-manual-on-120-277v-ivory","title":"SensorWorx SWX-103-IV Wall Switch Sensor - PIR - 1-Pole - Manual On - 120-277V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-103-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-103-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705170571367,"sku":"SWX-103-IV","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-103-IV.jpg?v=1714148623"},{"product_id":"sensorworx-swx-103-la-wall-switch-sensor-pir-1-pole-manual-on-120-277v-light-almond","title":"SensorWorx SWX-103-LA Wall Switch Sensor - PIR - 1-Pole - Manual On - 120-277V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-103-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-103-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705217560679,"sku":"SWX-103-LA","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-103-LA.jpg?v=1714148948"},{"product_id":"sensorworx-swx-103-gy-wall-switch-sensor-pir-1-pole-manual-on-120-277v-gray","title":"SensorWorx SWX-103-GY Wall Switch Sensor - PIR - 1-Pole - Manual On - 120-277V - Gray","description":"\u003ch1\u003eSensorWorx SWX-103-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-103-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705239842919,"sku":"SWX-103-GY","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-103-GY.jpg?v=1714149284"},{"product_id":"sensorworx-swx-111-1-wh-wall-switch-sensor-pir-daylight-detection-auto-on-stand-alone-12-24v-white","title":"SensorWorx SWX-111-1-WH Wall Switch Sensor - PIR + Daylight Detection - Auto On - Stand Alone - 12-24V- White","description":"\u003ch1\u003eSensorWorx SWX-111-1-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-1-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-111-1-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705257570407,"sku":"SWX-111-1-WH","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-111-1-WH.jpg?v=1714149769"},{"product_id":"sensorworx-swx-111-1-iv-wall-switch-sensor-pir-daylight-detection-auto-on-stand-alone-12-24v-ivory","title":"SensorWorx SWX-111-1-IV Wall Switch Sensor - PIR + Daylight Detection - Auto On - Stand Alone - 12-24V- Ivory","description":"\u003ch1\u003eSensorWorx SWX-111-1-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-1-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-111-1-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705296105575,"sku":"SWX-111-1-IV","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-111-1-IV.jpg?v=1714150362"},{"product_id":"sensorworx-swx-111-1-la-wall-switch-sensor-pir-daylight-detection-auto-on-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-111-1-LA Wall Switch Sensor - PIR + Daylight Detection - Auto On - Stand Alone - 12-24V- Light Almond","description":"\u003ch1\u003eSensorWorx SWX-111-1-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-1-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-111-1-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705316225127,"sku":"SWX-111-1-LA","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-111-1-LA.jpg?v=1714150688"},{"product_id":"sensorworx-swx-111-1-gy-wall-switch-sensor-pir-daylight-detection-auto-on-stand-alone-12-24v-gray","title":"SensorWorx SWX-111-1-GY Wall Switch Sensor - PIR + Daylight Detection - Auto On - Stand Alone - 12-24V- Gray","description":"\u003ch1\u003eSensorWorx SWX-111-1-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-1-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-111-1-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705334083687,"sku":"SWX-111-1-GY","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-111-1-GY.jpg?v=1714150992"},{"product_id":"sensorworx-swx-113-1-wh-wall-switch-sensor-pir-daylight-detection-manual-on-stand-alone-12-24v-white","title":"SensorWorx SWX-113-1-WH Wall Switch Sensor - PIR + Daylight Detection - Manual On - Stand Alone - 12-24V- White","description":"\u003ch1\u003eSensorWorx SWX-113-1-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-1-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensorsdetect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-113-1-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705361379431,"sku":"SWX-113-1-WH","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-113-1-WH.jpg?v=1714151425"},{"product_id":"sensorworx-swx-113-1-iv-wall-switch-sensor-pir-daylight-detection-manual-on-stand-alone-12-24v-ivory","title":"SensorWorx SWX-113-1-IV Wall Switch Sensor - PIR + Daylight Detection - Manual On - Stand Alone - 12-24V- Ivory","description":"\u003ch1\u003eSensorWorx SWX-113-1-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-1-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-113-1-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705489928295,"sku":"SWX-113-1-IV","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-113-1-IV.jpg?v=1714153804"},{"product_id":"sensorworx-swx-113-1-la-wall-switch-sensor-pir-daylight-detection-manual-on-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-113-1-LA Wall Switch Sensor - PIR + Daylight Detection - Manual On - Stand Alone - 12-24V- Light Almond","description":"\u003ch1\u003eSensorWorx SWX-113-1-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-1-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-113-1-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705504870503,"sku":"SWX-113-1-LA","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-113-1-LA.jpg?v=1714154104"},{"product_id":"sensorworx-swx-113-1-gy-wall-switch-sensor-pir-daylight-detection-manual-on-stand-alone-12-24v-gray","title":"SensorWorx SWX-113-1-GY Wall Switch Sensor - PIR + Daylight Detection - Manual On - Stand Alone - 12-24V- Gray","description":"\u003ch1\u003eSensorWorx SWX-113-1-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-1-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-113-1-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705518141543,"sku":"SWX-113-1-GY","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-113-1-GY.jpg?v=1714154409"},{"product_id":"sensorworx-swx-101-1-ms-wh-wall-switch-sensor-pir-auto-on-multi-switch-multi-sensor-12-24v-white","title":"SensorWorx SWX-101-1-MS-WH Wall Switch Sensor - Pir - Auto On - Multi-switch\/multi-sensor - 12-24v - White","description":"\u003ch1\u003eSensorWorx SWX-101-1-MS-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-MS-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-101-1-MS-WH\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:White\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705520304231,"sku":"SWX-101-1-MS-WH","price":64.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-1-MS-WH.png?v=1714154443"},{"product_id":"sensorworx-swx-101-1-ms-iv-wall-switch-sensor-pir-auto-on-multi-switch-multi-sensor-12-24v-ivory","title":"SensorWorx SWX-101-1-MS-IV Wall Switch Sensor - Pir - Auto On - Multi-switch\/multi-sensor - 12-24v - Ivory","description":"\u003ch1\u003eSensorWorx SWX-101-1-MS-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-MS-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-101-1-MS-IV\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Ivory\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705542717543,"sku":"SWX-101-1-MS-IV","price":62.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-1-MS-IV.png?v=1714154897"},{"product_id":"sensorworx-swx-111-wh-wall-switch-sensor-pir-daylight-detection-1-pole-auto-on-120-277v-white","title":"SensorWorx SWX-111-WH Wall Switch Sensor - PIR + Daylight Detection - 1-Pole - Auto On - 120-277V- White","description":"\u003ch1\u003eSensorWorx SWX-111-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection:detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-111-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705551138919,"sku":"SWX-111-WH","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-111-WH.jpg?v=1714155195"},{"product_id":"sensorworx-swx-101-1-ms-la-wall-switch-sensor-pir-auto-on-multi-switch-multi-sensor-12-24v-light-almond","title":"SensorWorx SWX-101-1-MS-LA Wall Switch Sensor - Pir - Auto On - Multi-switch\/multi-sensor - 12-24v - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-101-1-MS-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-MS-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-101-1-MS-LA\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Light Almond\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705570504807,"sku":"SWX-101-1-MS-LA","price":62.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-1-MS-LA.png?v=1714155437"},{"product_id":"sensorworx-swx-111-iv-wall-switch-sensor-pir-daylight-detection-1-pole-auto-on-120-277v-ivory","title":"SensorWorx SWX-111-IV Wall Switch Sensor - PIR + Daylight Detection - 1-Pole - Auto On - 120-277V- Ivory","description":"\u003ch1\u003eSensorWorx SWX-111-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-111-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705578008679,"sku":"SWX-111-IV","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-111-IV.jpg?v=1714155621"},{"product_id":"sensorworx-swx-101-1-ms-gy-wall-switch-sensor-pir-auto-on-multi-switch-multi-sensor-12-24v-gray","title":"SensorWorx SWX-101-1-MS-GY Wall Switch Sensor - Pir - Auto On - Multi-switch\/multi-sensor - 12-24v - Gray","description":"\u003ch1\u003eSensorWorx SWX-101-1-MS-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-MS-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-101-1-MS-GY\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Gray\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705589968999,"sku":"SWX-101-1-MS-GY","price":62.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-1-MS-GY.png?v=1714155747"},{"product_id":"sensorworx-swx-111-la-wall-switch-sensor-pir-daylight-detection-1-pole-auto-on-120-277v-light-almond","title":"SensorWorx SWX-111-LA Wall Switch Sensor - PIR + Daylight Detection - 1-Pole - Auto On - 120-277V- Light Almond","description":"\u003ch1\u003eSensorWorx SWX-111-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-111-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705594556519,"sku":"SWX-111-LA","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-111-LA.jpg?v=1714155878"},{"product_id":"sensorworx-swx-111-gy-wall-switch-sensor-pir-daylight-detection-1-pole-auto-on-120-277v-gray","title":"SensorWorx SWX-111-GY Wall Switch Sensor - PIR + Daylight Detection - 1-Pole - Auto On - 120-277V- Gray","description":"\u003ch1\u003eSensorWorx SWX-111-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-111-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705612939367,"sku":"SWX-111-GY","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-111-GY.jpg?v=1714156268"},{"product_id":"sensorworx-swx-113-wh-wall-switch-sensor-pir-daylight-detection-1-pole-manual-on-120-277v-white","title":"SensorWorx SWX-113-WH Wall Switch Sensor - PIR + Daylight Detection - 1-Pole - Manual On - 120-277V- White","description":"\u003ch1\u003eSensorWorx SWX-113-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-113-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705642856551,"sku":"SWX-113-WH","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-113-WH.jpg?v=1714156983"},{"product_id":"sensorworx-swx-121-1-wh-wall-switch-sensor-dual-tech-auto-on-stand-alone-12-24v-white","title":"SensorWorx SWX-121-1-WH Wall Switch Sensor - Dual Tech - Auto On - Stand Alone - 12-24v - White","description":"\u003ch1\u003eSensorWorx SWX-121-1-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-1-WH\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:White\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705661927527,"sku":"SWX-121-1-WH","price":78.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-WH.png?v=1714157130"},{"product_id":"sensorworx-swx-113-iv-wall-switch-sensor-pir-daylight-detection-1-pole-manual-on-120-277v-ivory","title":"SensorWorx SWX-113-IV Wall Switch Sensor - PIR + Daylight Detection - 1-Pole - Manual On - 120-277V- Ivory","description":"\u003ch1\u003eSensorWorx SWX-113-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-113-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705669791847,"sku":"SWX-113-IV","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-113-IV.jpg?v=1714157310"},{"product_id":"sensorworx-swx-101-1-wh-wall-switch-sensor-pir-auto-on-stand-alone-12-24v-white-finish","title":"SensorWorx SWX-101-1-WH Wall Switch Sensor - PIR - Auto On - Stand Alone - 12-24V - White Finish","description":"\u003ch1\u003eSensorWorx SWX-101-1-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eSensorWorx wireless wall switch load controller links to remote wireless occupancy sensors, photocells, and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical wall controllers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SensorWorx family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-101-1-WH\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003e \u003cbr\u003eDimensions\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705684537447,"sku":"SWX-101-1-WH","price":49.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-1-WH.jpg?v=1714157472"},{"product_id":"sensorworx-swx-121-1-iv-wall-switch-sensor-dual-tech-auto-on-stand-alone-12-24v-lvory","title":"SensorWorx SWX-121-1-IV Wall Switch Sensor - Dual Tech - Auto On - Stand Alone - 12-24v - lvory","description":"\u003ch1\u003eSensorWorx SWX-121-1-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-1-IV\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Ivory\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705693712487,"sku":"SWX-121-1-IV","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-IV.png?v=1714157590"},{"product_id":"sensorworx-swx-101-1-iv-wall-switch-sensor-pir-auto-on-stand-alone-12-24v-ivory-finish","title":"SensorWorx SWX-101-1-IV Wall Switch Sensor - PIR - Auto On - Stand Alone - 12-24V - Ivory Finish","description":"\u003ch1\u003eSensorWorx SWX-101-1-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eSensorWorx wireless wall switch load controller links to remote wireless occupancy sensors, photocells, and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical wall controllers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SensorWorx family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-101-1-IV\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705702789223,"sku":"SWX-101-1-IV","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-1-IV.jpg?v=1714157708"},{"product_id":"sensorworx-swx-113-la-wall-switch-sensor-pir-daylight-detection-1-pole-manual-on-120-277v-light-almond","title":"SensorWorx SWX-113-LA Wall Switch Sensor - PIR + Daylight Detection - 1-Pole - Manual On - 120-277V- Light Almond","description":"\u003ch1\u003eSensorWorx SWX-113-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-113-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705704165479,"sku":"SWX-113-LA","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-113-LA.jpg?v=1714157855"},{"product_id":"sensorworx-swx-101-1-la-wall-switch-sensor-pir-auto-on-stand-alone-12-24v-light-almond-finish","title":"SensorWorx SWX-101-1-LA Wall Switch Sensor - PIR - Auto On - Stand Alone - 12-24V - Light Almond Finish","description":"\u003ch1\u003eSensorWorx SWX-101-1-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eSensorWorx wireless wall switch load controller links to remote wireless occupancy sensors, photocells, and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical wall controllers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SensorWorx family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-101-1-LA\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705712128103,"sku":"SWX-101-1-LA","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-1-LA.jpg?v=1714157859"},{"product_id":"sensorworx-swx-121-1-la-wall-switch-sensor-dual-tech-auto-on-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-121-1-LA Wall Switch Sensor - Dual Tech - Auto On - Stand Alone - 12-24v - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-121-1-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-1-LA\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Light Almond\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705713209447,"sku":"SWX-121-1-LA","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-LA.png?v=1714157904"},{"product_id":"sensorworx-swx-101-1-gy-wall-switch-sensor-pir-auto-on-stand-alone-12-24v-gray-finish","title":"SensorWorx SWX-101-1-GY Wall Switch Sensor - PIR - Auto On - Stand Alone - 12-24V - Gray Finish","description":"\u003ch1\u003eSensorWorx SWX-101-1-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eSensorWorx wireless wall switch load controller links to remote wireless occupancy sensors, photocells, and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical wall controllers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SensorWorx family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-101-1-GY\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003e\u003cbr\u003eDimensions\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705725988967,"sku":"SWX-101-1-GY","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-101-1-GY.jpg?v=1714158126"},{"product_id":"sensorworx-swx-113-gy-wall-switch-sensor-pir-daylight-detection-1-pole-manual-on-120-277v-gray","title":"SensorWorx SWX-113-GY Wall Switch Sensor - PIR + Daylight Detection - 1-Pole - Manual On - 120-277V- Gray","description":"\u003ch1\u003eSensorWorx SWX-113-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003ePassive infrared detection: detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-113-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705728217191,"sku":"SWX-113-GY","price":51.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-113-GY.jpg?v=1714158205"},{"product_id":"sensorworx-swx-121-1-gy-wall-switch-sensor-dual-tech-auto-on-stand-alone-12-24v-gray","title":"SensorWorx SWX-121-1-GY Wall Switch Sensor - Dual Tech - Auto On - Stand Alone - 12-24v - Gray","description":"\u003ch1\u003eSensorWorx SWX-121-1-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-1-GY\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Gray\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705731657831,"sku":"SWX-121-1-GY","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-GY.png?v=1714158245"},{"product_id":"sensorworx-swx-103-1-wh-wall-switch-sensor-pir-manual-on-stand-alone-12-24v-white-finish","title":"SensorWorx SWX-103-1-WH Wall Switch Sensor - PIR - Manual On - Stand Alone - 12-24V - White Finish","description":"\u003ch1\u003eSensorWorx SWX-103-1-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-1-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eSensorWorx wireless wall switch load controller links to remote wireless occupancy sensors, photocells, and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical wall controllers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SensorWorx family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-103-1-WH\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003e \u003cbr\u003eDimensions\u003cbr\u003eDimensions\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705741553767,"sku":"SWX-103-1-WH","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-103-1-WH.jpg?v=1714158436"},{"product_id":"sensorworx-swx-123-wh-wall-switch-sensor-dual-tech-1-pole-manual-on-120-277v-white","title":"SensorWorx SWX-123-WH Wall Switch Sensor - Dual Tech - 1-Pole - Manual On - 120-277V- White","description":"\u003ch1\u003eSensorWorx SWX-123-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-123-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eManufacturer Part Number: SWX-123-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003e \u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705747222631,"sku":"SWX-123-WH","price":78.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-123-WH.jpg?v=1714158648"},{"product_id":"sensorworx-swx-103-1-iv-wall-switch-sensor-pir-manual-on-stand-alone-12-24v-ivory-finish","title":"SensorWorx SWX-103-1-IV Wall Switch Sensor - PIR - Manual On - Stand Alone - 12-24V - Ivory Finish","description":"\u003ch1\u003eSensorWorx SWX-103-1-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-1-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eSensorWorx wireless wall switch load controller links to remote wireless occupancy sensors, photocells, and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical wall controllers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SensorWorx family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-103-1-IV\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003e \u003cbr\u003eDimensions\u003cbr\u003eDimensions\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705748435047,"sku":"SWX-103-1-IV","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-103-1-IV.jpg?v=1714158622"},{"product_id":"sensorworx-swx-103-1-la-wall-switch-sensor-pir-manual-on-stand-alone-12-24v-light-almond-finish","title":"SensorWorx SWX-103-1-LA Wall Switch Sensor - PIR - Manual On - Stand Alone - 12-24V - Light Almond Finish","description":"\u003ch1\u003eSensorWorx SWX-103-1-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-1-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eSensorWorx wireless wall switch load controller links to remote wireless occupancy sensors, photocells, and switches without low voltage wiring in order to provide automatic lighting control. Designed with contractors in mind, the unit is significantly shallower than typical wall controllers, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral connection and never requires a minimum load. This switch also matches the SensorWorx family of wall switch occupancy sensors and 0-10V dimming wall switch sensors.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-103-1-LA\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eDimensions\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705756627047,"sku":"SWX-103-1-LA","price":47.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-103-1-LA.jpg?v=1714158797"},{"product_id":"sensorworx-swx-123-1-wh-wall-switch-sensor-dual-tech-manual-on-stand-alone-12-24v-white","title":"SensorWorx SWX-123-1-WH Wall Switch Sensor - Dual Tech - Manual On - Stand Alone - 12-24v - White","description":"\u003ch1\u003eSensorWorx SWX-123-1-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-123-1-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003c\/p\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eOperational Features:\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-123-1-WH\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:White\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705763442791,"sku":"SWX-123-1-WH","price":78.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-123-1-WH.png?v=1714158957"},{"product_id":"sensorworx-swx-123-1-iv-wall-switch-sensor-dual-tech-manual-on-stand-alone-12-24v-lvory","title":"SensorWorx SWX-123-1-IV Wall Switch Sensor - Dual Tech - Manual On - Stand Alone - 12-24v - lvory","description":"\u003ch1\u003eSensorWorx SWX-123-1-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-123-1-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003c\/p\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eOperational Features:\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-123-1-IV\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Ivory\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705780547687,"sku":"SWX-123-1-IV","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-123-1-IV.png?v=1714159329"},{"product_id":"sensorworx-swx-123-1-la-wall-switch-sensor-dual-tech-manual-on-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-123-1-LA Wall Switch Sensor - Dual Tech - Manual On - Stand Alone - 12-24v - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-123-1-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-123-1-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-123-1-LA\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Light Almond\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705810038887,"sku":"SWX-123-1-LA","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-123-1-LA.png?v=1714159997"},{"product_id":"sensorworx-swx-123-1-gy-wall-switch-sensor-dual-tech-manual-on-stand-alone-12-24v-gray","title":"SensorWorx SWX-123-1-GY Wall Switch Sensor - Dual Tech - Manual On - Stand Alone - 12-24v - Gray","description":"\u003ch1\u003eSensorWorx SWX-123-1-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-123-1-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eLow-voltage 12-24V operation\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003cbr\u003eOptional wiring connections for multi-way or multi-sensor applications\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-123-1-GY\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eColor:Gray\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705858764903,"sku":"SWX-123-1-GY","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-123-1-GY.png?v=1714160776"},{"product_id":"sensorworx-swx-121-wh-wall-switch-sensor-dual-tech-1-pole-auto-on-120-277v-white","title":"SensorWorx SWX-121-WH Wall Switch Sensor - Dual Tech - 1-pole - Auto On - 120-277v - White","description":"\u003ch1\u003eSensorWorx SWX-121-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eElectrical Features:\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-WH\u003cbr\u003eInput Voltage:120-277V\u003cbr\u003eColor:White\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705879146599,"sku":"SWX-121-WH","price":78.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-WH.png?v=1714161128"},{"product_id":"sensorworx-swx-121-iv-wall-switch-sensor-dual-tech-1-pole-auto-on-120-277v-lvory","title":"SensorWorx SWX-121-IV Wall Switch Sensor - Dual Tech - 1-pole - Auto On - 120-277v - lvory","description":"\u003ch1\u003eSensorWorx SWX-121-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eElectrical Features:\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-IV\u003cbr\u003eInput Voltage:120-277V\u003cbr\u003eColor:Ivory\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705904574567,"sku":"SWX-121-IV","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-IV.png?v=1714161551"},{"product_id":"sensorworx-swx-121-la-wall-switch-sensor-dual-tech-1-pole-auto-on-120-277v-light-almond","title":"SensorWorx SWX-121-LA Wall Switch Sensor - Dual Tech - 1-pole - Auto On - 120-277v - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-121-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eElectrical Features:\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-LA\u003cbr\u003eInput Voltage:120-277V\u003cbr\u003eColor:Light Almond\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705955135591,"sku":"SWX-121-LA","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-LA.png?v=1714162355"},{"product_id":"sensorworx-swx-121-gy-wall-switch-sensor-dual-tech-1-pole-auto-on-120-277v-gray","title":"SensorWorx SWX-121-GY Wall Switch Sensor - Dual Tech - 1-pole - Auto On - 120-277v - Gray","description":"\u003ch1\u003eSensorWorx SWX-121-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eElectrical Features:\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-GY\u003cbr\u003eInput Voltage:120-277V\u003cbr\u003eColor:Gray\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40705974239335,"sku":"SWX-121-GY","price":75.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-GY.png?v=1714162718"},{"product_id":"sensorworx-swx-121-d-iv-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-120-277v-ivory","title":"SensorWorx SWX-121-D-IV Wall Switch Sensor - Dual Tech - Auto On - 0-10V Dimming - 120-277V - Ivory","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"SWX-121-D-IV\"}' data-sheets-userformat='{\"2\":769,\"3\":{\"1\":0},\"11\":3,\"12\":0}'\u003eSWX-121-D-IV\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"SWX-121-D-IV\"}' data-sheets-userformat='{\"2\":769,\"3\":{\"1\":0},\"11\":3,\"12\":0}'\u003eSWX-121-D-IV\u003c\/span\u003e Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-121-D-IV\u003cbr\u003eInput Voltage: 120-277V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0-10V dimming control\u003c\/li\u003e\n\u003cli\u003eInterchangeable line and load wires – impossible to wire backwards\u003c\/li\u003e\n\u003cli\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003c\/li\u003e\n\u003cli\u003eElectronically timed switching ensures long relay life\u003c\/li\u003e\n\u003cli\u003eCompatible with LED, fluorescent and incandescent lighting\u003c\/li\u003e\n\u003cli\u003eMeets NEC guidelines regarding current leakage\u003c\/li\u003e\n\u003cli\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710436323431,"sku":"SWX-121-D-IV","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/134.20.jpg?v=1714393444"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/collections\/swx_100_bk_wfaceplate_b0e74bb8-ec2f-4b87-9ff2-05f64c3a7d4f.webp?v=1794471663","url":"https:\/\/buyriteelectric.com\/en-ca\/collections\/sensorworx-wall-switch-sensors.oembed","provider":"BuyRite Electric","version":"1.0","type":"link"}