{"title":"SensorWorx — Low-Voltage (12-24V) 0-10V Dimming Switch Sensors","description":"\u003cp\u003eShop SensorWorx Low-Voltage (12-24V) 0-10V Dimming Switch Sensors at BuyRite Electric.\u003c\/p\u003e","products":[{"product_id":"sensorworx-swx-133-1-d-gy-wall-switch-sensor-dual-tech-daylight-detection-manual-on-0-10v-dimming-stand-alone-12-24v-gray","title":"SensorWorx SWX-133-1-D-GY Wall Switch Sensor - Dual Tech + Daylight Detection - Manual On - 0-10v Dimming - Stand Alone - 12-24v - Gray","description":"\u003ch1\u003eSensorWorx SWX-133-1-D-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-133-1-D-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech + daylight detection: passive infrared sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-133-1-D-GY\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eDimmable:0-10V\u003cbr\u003eColor:Gray\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710494191719,"sku":"SWX-133-1-D-GY","price":131.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-133-1-D-GY.png?v=1714397608"},{"product_id":"sensorworx-swx-101-1-d-wh-wall-switch-sensor-pir-auto-on-0-10v-dimming-stand-alone-120-277v-white","title":"SensorWorx SWX-101-1-D-WH Wall Switch Sensor - PIR - Auto On - 0-10v Dimming - Stand Alone - 12-24V - White","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-D-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePassive infrared detection: \u003c\/strong\u003esensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation\u003c\/strong\u003e: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control\u003c\/strong\u003e: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-101-1-D-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: White\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wall box)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710498746471,"sku":"SWX-101-1-D-WH","price":99.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100-1-d_white.jpg?v=1714397450"},{"product_id":"sensorworx-swx-121-1-d-ms-wh-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-multi-switch-sensor-12-24v-white","title":"SensorWorx SWX-121-1-D-MS-WH Wall Switch Sensor - Dual Tech - Auto On - 0-10v Dimming - Multi-switch \/ Sensor - 12-24v - White","description":"\u003ch1\u003eSensorWorx SWX-121-1-D-MS-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-D-MS-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eElectrical Features:\u003cbr\u003e0-10V dimming control\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-1-D-MS-WH\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eDimmable:0-10V\u003cbr\u003eColor:White\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710506643559,"sku":"SWX-121-1-D-MS-WH","price":149.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-D-MS-WH.png?v=1714398151"},{"product_id":"sensorworx-swx-101-1-d-iv-wall-switch-sensor-pir-auto-on-0-10v-dimming-stand-alone-120-277v-ivory","title":"SensorWorx SWX-101-1-D-IV Wall Switch Sensor - PIR - Auto On - 0-10v Dimming - Stand Alone - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-D-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePassive infrared detection\u003c\/strong\u003e: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation\u003c\/strong\u003e: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control\u003c\/strong\u003e: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-101-1-D-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Ivory\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710510837863,"sku":"SWX-101-1-D-IV","price":99.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_ivory.jpg?v=1714397971"},{"product_id":"sensorworx-swx-121-1-d-ms-iv-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-multi-switch-sensor-12-24v-lvory","title":"SensorWorx SWX-121-1-D-MS-IV Wall Switch Sensor - Dual Tech - Auto On - 0-10v Dimming - Multi-switch \/ Sensor - 12-24v - lvory","description":"\u003ch1\u003eSensorWorx SWX-121-1-D-MS-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-D-MS-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eElectrical Features:\u003cbr\u003e0-10V dimming control\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number: SWX-121-1-D-MS-lV\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eDimmable:0-10V\u003cbr\u003eColor:White\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710519980135,"sku":"SWX-121-1-D-MS-IV","price":144.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-D-MS-IV.png?v=1714398690"},{"product_id":"sensorworx-swx-101-1-d-la-wall-switch-sensor-pir-auto-on-0-10v-dimming-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-101-1-D-LA Wall Switch Sensor - PIR - Auto On - 0-10v Dimming - Stand Alone - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-D-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePassive infrared detection\u003c\/strong\u003e: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:  \u003c\/strong\u003ewhen coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-101-1-D-LA \u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Light Almond\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710536298599,"sku":"SWX-101-1-D-LA","price":99.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_light_almond.jpg?v=1714399055"},{"product_id":"sensorworx-swx-121-1-d-ms-la-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-multi-switch-sensor-12-24v-light-almond","title":"SensorWorx SWX-121-1-D-MS-LA Wall Switch Sensor - Dual Tech - Auto On - 0-10v Dimming - Multi-switch \/ Sensor - 12-24v - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-121-1-D-MS-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-D-MS-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eElectrical Features:\u003cbr\u003e0-10V dimming control\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-1-D-MS-WH\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eDimmable:0-10V\u003cbr\u003eColor:Light Almond\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710536953959,"sku":"SWX-121-1-D-MS-LA","price":144.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-D-MS-LA.png?v=1714399649"},{"product_id":"sensorworx-swx-101-1-d-gy-wall-switch-sensor-pir-auto-on-0-10v-dimming-stand-alone-12-24v-gray","title":"SensorWorx SWX-101-1-D-GY Wall Switch Sensor - PIR - Auto On - 0-10v Dimming - Stand Alone - 12-24V - Gray","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-D-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePassive infrared detection\u003c\/strong\u003e: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-101-1-D-GY \u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Gray\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wall box)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710551863399,"sku":"SWX-101-1-D-GY","price":99.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_gray_1.jpg?v=1714399663"},{"product_id":"sensorworx-swx-121-1-d-wh-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-stand-alone-12-24v-white","title":"SensorWorx SWX-121-1-D-WH Wall Switch Sensor - Dual Tech - Auto On - 0-10V Dimming - Stand Alone - 12-24V - White","description":"\u003ch1\u003eSensorWorx SWX-121-1-D-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-D-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Stand  Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-121-1-D-WH\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710557532263,"sku":"SWX-121-1-D-WH","price":130.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-121-1-D-WHSWX-121-1.jpg?v=1714400788"},{"product_id":"sensorworx-swx-121-1-d-iv-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-stand-alone-12-24v-ivory","title":"SensorWorx SWX-121-1-D-IV Wall Switch Sensor - Dual Tech - Auto On - 0-10V Dimming - Stand Alone - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-121-1-D-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-D-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-121-1-D-IV\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710585876583,"sku":"SWX-121-1-D-IV","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-D-IV.jpg?v=1714401196"},{"product_id":"sensorworx-swx-103-1-d-wh-wall-switch-sensor-pir-manual-on-0-10v-dimming-stand-alone-12-24v-white","title":"SensorWorx SWX-103-1-D-WH Wall Switch Sensor - PIR - Manual On - 0-10V Dimming - Stand Alone - 12-24V - White","description":"\u003ch1\u003eSensorWorx SWX-103-1-D-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-1-D-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePassive infrared detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManual On \/ Automatic Off operation:\u003c\/strong\u003e lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-103-1-D-WH \u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: White\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wall box)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710588366951,"sku":"SWX-103-1-D-WH","price":103.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100-1-d_white_1.jpg?v=1714400919"},{"product_id":"sensorworx-swx-121-1-d-la-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-121-1-D-LA Wall Switch Sensor - Dual Tech - Auto On - 0-10V Dimming - Stand Alone - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-121-1-D-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-D-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-121-1-D-LA\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710594429031,"sku":"SWX-121-1-D-LA","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-D-LA.jpg?v=1714401490"},{"product_id":"sensorworx-swx-103-1-d-iv-wall-switch-sensor-pir-manual-on-0-10v-dimming-stand-alone-12-24v-ivory","title":"SensorWorx SWX-103-1-D-IV Wall Switch Sensor - PIR - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-103-1-D-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-1-D-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePassive infrared detection\u003c\/strong\u003e: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManual On \/ Automatic Off operation: \u003c\/strong\u003elights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-103-1-D-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Ivory\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710596100199,"sku":"SWX-103-1-D-IV","price":99.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_ivory_1.jpg?v=1714401278"},{"product_id":"sensorworx-swx-121-1-d-gy-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-stand-alone-12-24v-gray","title":"SensorWorx SWX-121-1-D-GY Wall Switch Sensor - Dual Tech - Auto On - 0-10V Dimming - Stand Alone - 12-24V - Gray","description":"\u003ch1\u003eSensorWorx SWX-121-1-D-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-D-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-121-1-D-GY\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710601146471,"sku":"SWX-121-1-D-GY","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_gray_13b7b5c7-d229-42e1-a14b-e6370b4c8a5f.jpg?v=1714401672"},{"product_id":"sensorworx-swx-121-1-d-ms-gy-wall-switch-sensor-dual-tech-auto-on-0-10v-dimming-multi-switch-sensor-12-24v-gray","title":"SensorWorx SWX-121-1-D-MS-GY Wall Switch Sensor - Dual Tech - Auto On - 0-10v Dimming - Multi-switch \/ Sensor - 12-24v - Gray","description":"\u003ch1\u003eSensorWorx SWX-121-1-D-MS-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-121-1-D-MS-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx wall switch sensor is significantly shallower than typical sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eElectrical Features:\u003cbr\u003e0-10V dimming control\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/p\u003e\n\u003cp\u003ePhysical Features:\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003c\/p\u003e\n\u003cp\u003eOperational Features:\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer:SensorWorx\u003cbr\u003eOccupancy Sensor Type:Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type:Button\u003cbr\u003eManufacturer Part Number:SWX-121-1-D-MS-GY\u003cbr\u003eInput Voltage:12V, 12-24V, 24V\u003cbr\u003eDimmable:0-10V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone:180 Degrees\u003cbr\u003eSensor Coverage:2,025 Sq Ft\u003cbr\u003eMin Operating Temp:32 Degrees F\u003cbr\u003eSpecial Features:B.A.A. Compliant\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710606880871,"sku":"SWX-121-1-D-MS-GY","price":144.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-121-1-D-MS-GY.png?v=1714401796"},{"product_id":"sensorworx-swx-123-1-d-wh-wall-switch-sensor-dual-tech-manual-on-0-10v-dimming-stand-alone-12-24v-white","title":"SensorWorx SWX-123-1-D-WH Wall Switch Sensor - Dual Tech - Manual On - 0-10V Dimming - Stand Alone - 12-24V - White","description":"\u003ch1\u003eSensorWorx SWX-123-1-D-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-123-1-D-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On, Stand  Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-123-1-D-WH\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710609862759,"sku":"SWX-123-1-D-WH","price":130.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-123-1-D.jpg?v=1714401949"},{"product_id":"sensorworx-swx-103-1-d-la-wall-switch-sensor-pir-manual-on-0-10v-dimming-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-103-1-D-LA Wall Switch Sensor - PIR - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-103-1-D-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-1-D-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePassive infrared detection: \u003c\/strong\u003esensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManual On \/ Automatic Off operation: \u003c\/strong\u003elights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-103-1-D-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Light Almond\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710616940647,"sku":"SWX-103-1-D-LA","price":99.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_light_almond_1.jpg?v=1714401575"},{"product_id":"sensorworx-swx-103-1-d-gy-wall-switch-sensor-pir-manual-on-0-10v-dimming-stand-alone-12-24v-gray","title":"SensorWorx SWX-103-1-D-GY Wall Switch Sensor - PIR - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Gray","description":"\u003ch1\u003eSensorWorx SWX-103-1-D-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-103-1-D-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePassive infrared detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManual On \/ Automatic Off operation: \u003c\/strong\u003elights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-103-1-D-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Gray\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710631981159,"sku":"SWX-103-1-D-GY","price":99.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_gray_2.jpg?v=1714402246"},{"product_id":"sensorworx-swx-123-1-d-iv-wall-switch-sensor-dual-tech-manual-on-0-10v-dimming-stand-alone-12-24v-ivory","title":"SensorWorx SWX-123-1-D-IV Wall Switch Sensor - Dual Tech - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-123-1-D-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-123-1-D-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On, Stand  Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-123-1-D-IV\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710647775335,"sku":"SWX-123-1-D-IV","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-123-1-D-IVSWX-123-1.jpg?v=1714403152"},{"product_id":"sensorworx-swx-123-1-d-la-wall-switch-sensor-dual-tech-manual-on-0-10v-dimming-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-123-1-D-LA Wall Switch Sensor - Dual Tech - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"SWX-123-1-D-LA\"}' data-sheets-userformat='{\"2\":769,\"3\":{\"1\":0},\"11\":3,\"12\":0}'\u003eSWX-123-1-D-LA\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\" data-sheets-value='{\"1\":2,\"2\":\"SWX-123-1-D-LA\"}' data-sheets-userformat='{\"2\":769,\"3\":{\"1\":0},\"11\":3,\"12\":0}'\u003eSWX-123-1-D-LA\u003c\/span\u003e Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On, Stand  Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-123-1-D-LA\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710656360551,"sku":"SWX-123-1-D-LA","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-123-1-D-LASWX-123-1-D-LA.jpg?v=1714403474"},{"product_id":"sensorworx-swx-123-1-d-gy-wall-switch-sensor-dual-tech-manual-on-0-10v-dimming-stand-alone-12-24v-gray","title":"SensorWorx SWX-123-1-D-GY Wall Switch Sensor - Dual Tech - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Gray","description":"\u003ch1\u003eSensorWorx SWX-123-1-D-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-123-1-D-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech (PIR + ultrasonic) detection: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Manual On, Stand  Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-123-1-D-GY\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710677004391,"sku":"SWX-123-1-D-GY","price":126.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-123-1-D-GYSWX.jpg?v=1714403735"},{"product_id":"sensorworx-swx-131-1-d-wh-wall-switch-sensor-dual-tech-daylight-detection-auto-on-0-10v-dimming-stand-alone-12-24v-white","title":"SensorWorx SWX-131-1-D-WH Wall Switch Sensor - Dual Tech + Daylight Detection - Auto On - 0-10V Dimming - Stand-Alone - 12-24V - White","description":"\u003ch1\u003eSensorWorx SWX-131-1-D-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-131-1-D-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech + daylight detection:: passive infrared sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-131-1-D-WH\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0-10V dimming control\u003c\/li\u003e\n\u003cli\u003eInterchangeable line and load wires – impossible to wire backwards\u003c\/li\u003e\n\u003cli\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003c\/li\u003e\n\u003cli\u003eElectronically timed switching ensures long relay life\u003c\/li\u003e\n\u003cli\u003eCompatible with LED, fluorescent and incandescent lighting\u003c\/li\u003e\n\u003cli\u003eMeets NEC guidelines regarding current leakage\u003c\/li\u003e\n\u003cli\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710855753831,"sku":"SWX-131-1-D-WH","price":131.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/SWX-131-1-D-WH.jpg?v=1714410093"},{"product_id":"sensorworx-swx-111-1-d-wh-wall-switch-sensor-pir-daylight-detection-auto-on-0-10v-dimming-stand-alone-12-24v-white","title":"SensorWorx SWX-111-1-D-WH Wall Switch Sensor - PIR - Daylight Detection - Auto On - 0-10V Dimming - Stand Alone - 12-24V - White","description":"\u003ch1\u003eSensorWorx SWX-111-1-D-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-1-D-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePIR + daylight detection: \u003c\/strong\u003esensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-111-1-D-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: White\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003e0-10V dimming control\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710861455463,"sku":"SWX-111-1-D-WH","price":104.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100-1-d_white_4.jpg?v=1714409904"},{"product_id":"sensorworx-swx-131-1-d-iv-wall-switch-sensor-dual-tech-daylight-detection-auto-on-0-10v-dimming-stand-alone-12-24v-ivory-1","title":"SensorWorx SWX-131-1-D-IV Wall Switch Sensor - Dual Tech + Daylight Detection - Auto On - 0-10V Dimming - Stand-Alone - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-131-1-D-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-131-1-D-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech + daylight detection:: passive infrared sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-131-1-D-IV\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0-10V dimming control\u003c\/li\u003e\n\u003cli\u003eInterchangeable line and load wires – impossible to wire backwards\u003c\/li\u003e\n\u003cli\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003c\/li\u003e\n\u003cli\u003eElectronically timed switching ensures long relay life\u003c\/li\u003e\n\u003cli\u003eCompatible with LED, fluorescent and incandescent lighting\u003c\/li\u003e\n\u003cli\u003eMeets NEC guidelines regarding current leakage\u003c\/li\u003e\n\u003cli\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710862995559,"sku":"SWX-131-1-D-IV","price":131.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-131-1-D-IVSWX-131-1-D-IVatBuyRiteEl.jpg?v=1714410423"},{"product_id":"sensorworx-swx-111-1-d-iv-wall-switch-sensor-pir-daylight-detection-auto-on-0-10v-dimming-stand-alone-12-24v-ivory","title":"SensorWorx SWX-111-1-D-IV Wall Switch Sensor - PIR - Daylight Detection - Auto On - 0-10V Dimming - Stand Alone - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-111-1-D-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-1-D-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePIR + daylight detection: \u003c\/strong\u003esensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-111-1-D-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Ivory\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003e0-10V dimming control\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710867124327,"sku":"SWX-111-1-D-IV","price":104.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_ivory_4.jpg?v=1714410330"},{"product_id":"sensorworx-swx-131-1-d-la-wall-switch-sensor-dual-tech-daylight-detection-auto-on-0-10v-dimming-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-131-1-D-LA Wall Switch Sensor - Dual Tech + Daylight Detection - Auto On - 0-10V Dimming - Stand-Alone - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-131-1-D-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-131-1-D-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech + daylight detection:: passive infrared sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-131-1-D-LA\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0-10V dimming control\u003c\/li\u003e\n\u003cli\u003eInterchangeable line and load wires – impossible to wire backwards\u003c\/li\u003e\n\u003cli\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003c\/li\u003e\n\u003cli\u003eElectronically timed switching ensures long relay life\u003c\/li\u003e\n\u003cli\u003eCompatible with LED, fluorescent and incandescent lighting\u003c\/li\u003e\n\u003cli\u003eMeets NEC guidelines regarding current leakage\u003c\/li\u003e\n\u003cli\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710875316327,"sku":"SWX-131-1-D-LA","price":131.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-131-1-D-LASWX-131-1-D-LAatBuyR.jpg?v=1714411372"},{"product_id":"sensorworx-swx-111-1-d-la-wall-switch-sensor-pir-daylight-detection-auto-on-0-10v-dimming-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-111-1-D-LA Wall Switch Sensor - PIR - Daylight Detection - Auto On - 0-10V Dimming - Stand Alone - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-111-1-D-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-1-D-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePIR + daylight detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control: \u003c\/strong\u003ewhen coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-111-1-D-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Light Almond\u003c\/p\u003e\n\u003ch2\u003e\n\u003cbr\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003e0-10V dimming control\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710877610087,"sku":"SWX-111-1-D-LA","price":104.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_light_almond_4.jpg?v=1714410641"},{"product_id":"sensorworx-swx-111-1-d-gy-wall-switch-sensor-pir-daylight-detection-auto-on-0-10v-dimming-stand-alone-12-24v-gray","title":"SensorWorx SWX-111-1-D-GY Wall Switch Sensor - PIR - Daylight Detection - Auto On - 0-10V Dimming - Stand Alone - 12-24V - Gray","description":"\u003ch1\u003eSensorWorx SWX-111-1-D-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-111-1-D-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePIR + daylight detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-111-1-D-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Gray\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003e0-10V dimming control\u003cbr\u003eInterchangeable line and load wires – impossible to wire backwards\u003cbr\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003cbr\u003eElectronically timed switching ensures long relay life\u003cbr\u003eCompatible with LED, fluorescent and incandescent lighting\u003cbr\u003eMeets NEC guidelines regarding current leakage\u003cbr\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003cbr\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710885376103,"sku":"SWX-111-1-D-GY","price":104.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_gray_5.jpg?v=1714411056"},{"product_id":"sensorworx-swx-131-1-d-gy-wall-switch-sensor-dual-tech-daylight-detection-auto-on-0-10v-dimming-stand-alone-12-24v-gray","title":"SensorWorx SWX-131-1-D-GY Wall Switch Sensor - Dual Tech + Daylight Detection - Auto On - 0-10V Dimming - Stand Alone - 12-24V - Gray","description":"\u003ch1\u003eSensorWorx SWX-131-1-D-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-131-1-D-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech + daylight detection:: passive infrared sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eAutomatic On and Automatic Off operation: If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Daylight Harvesting, Auto On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-131-1-D-GY\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Gray\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e0-10V dimming control\u003c\/li\u003e\n\u003cli\u003eInterchangeable line and load wires – impossible to wire backwards\u003c\/li\u003e\n\u003cli\u003eAccommodates neutral (3-wire) and no-neutral (2-Wire) installation\u003c\/li\u003e\n\u003cli\u003eElectronically timed switching ensures long relay life\u003c\/li\u003e\n\u003cli\u003eCompatible with LED, fluorescent and incandescent lighting\u003c\/li\u003e\n\u003cli\u003eMeets NEC guidelines regarding current leakage\u003c\/li\u003e\n\u003cli\u003eLoad ratings: 800W max (120V) and 1200W max (277V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710890487911,"sku":"SWX-131-1-D-GY","price":131.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-131-1-D-GYSWX-131-1-D-G.jpg?v=1714411669"},{"product_id":"sensorworx-swx-133-1-d-wh-wall-switch-sensor-dual-tech-daylight-detection-manual-on-0-10v-dimming-stand-alone-12-24v-white","title":"SensorWorx SWX-133-1-D-WH Wall Switch Sensor - Dual Tech + Daylight Detection - Manual On - 0-10V Dimming - Stand Alone - 12-24V - White","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-userformat='{\"2\":769,\"3\":{\"1\":0},\"11\":3,\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"SWX-133-1-D-WH\"}' data-sheets-root=\"1\"\u003eSWX-133-1-D-WH\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-userformat='{\"2\":769,\"3\":{\"1\":0},\"11\":3,\"12\":0}' data-sheets-value='{\"1\":2,\"2\":\"SWX-133-1-D-WH\"}' data-sheets-root=\"1\"\u003eSWX-133-1-D-WH\u003c\/span\u003e Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech + daylight detection: passive infrared sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each\u003cspan style=\"font-size: 0.875rem;\"\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-133-1-D-WH\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: White\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710894452839,"sku":"SWX-133-1-D-WH","price":131.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-133-1-D-WHSWX-133-1-D-WH.jpg?v=1714411946"},{"product_id":"sensorworx-swx-113-1-d-wh-wall-switch-sensor-pir-daylight-detection-manual-on-0-10v-dimming-stand-alone-12-24v-white","title":"SensorWorx SWX-113-1-D-WH Wall Switch Sensor - PIR - Daylight Detection - Manual On - 0-10V Dimming - Stand Alone - 12-24V - White","description":"\u003ch1\u003eSensorWorx SWX-113-1-D-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-1-D-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePIR + daylight detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003cbr\u003e\u003cstrong\u003eManual On \/ Automatic Off operation: \u003c\/strong\u003elights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control: \u003c\/strong\u003ewhen coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-113-1-D-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: White\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710895075431,"sku":"SWX-113-1-D-WH","price":104.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100-1-d_white_5.jpg?v=1714411500"},{"product_id":"sensorworx-swx-133-1-d-iv-wall-switch-sensor-dual-tech-daylight-detection-manual-on-0-10v-dimming-stand-alone-12-24v-ivory","title":"SensorWorx SWX-133-1-D-IV Wall Switch Sensor - Dual Tech + Daylight Detection - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-133-1-D-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-133-1-D-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech + daylight detection: passive infrared sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each\u003cspan style=\"font-size: 0.875rem;\"\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-133-1-D-IV\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Ivory\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710899007591,"sku":"SWX-133-1-D-IV","price":131.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-133-1-D-IVSWX-13.jpg?v=1714412185"},{"product_id":"sensorworx-swx-113-1-d-iv-wall-switch-sensor-pir-daylight-detection-manual-on-0-10v-dimming-stand-alone-12-24v-ivory","title":"SensorWorx SWX-113-1-D-IV Wall Switch Sensor - PIR - Daylight Detection - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-113-1-D-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-1-D-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePIR + daylight detection: \u003c\/strong\u003esensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003cbr\u003e\u003cstrong\u003eManual On \/ Automatic Off operation:\u003c\/strong\u003e lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-113-1-D-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Ivory\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710899368039,"sku":"SWX-113-1-D-IV","price":104.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_ivory_5.jpg?v=1714411952"},{"product_id":"sensorworx-swx-133-1-d-la-wall-switch-sensor-dual-tech-daylight-detection-manual-on-0-10v-dimming-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-133-1-D-LA Wall Switch Sensor - Dual Tech + Daylight Detection - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-133-1-D-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-133-1-D-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003cp\u003eDual tech + daylight detection: passive infrared sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. These units are also equipped with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003c\/p\u003e\n\u003cp\u003eManual On \/ Automatic Off operation: lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003c\/p\u003e\n\u003cp\u003eLow-voltage 12-24V operation and 0-10V dimming control: when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each\u003cspan style=\"font-size: 0.875rem;\"\u003e.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eManufacturer: SensorWorx\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Ultrasonic, Dual Tech (PIR + Ultrasonic), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eManufacturer Part Number: SWX-133-1-D-LA\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eColor: Light Almond\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003c\/li\u003e\n\u003cli\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003c\/li\u003e\n\u003cli\u003eSelf-grounding mounting strap\u003c\/li\u003e\n\u003cli\u003eModern look and intuitive easy-tap button\u003c\/li\u003e\n\u003cli\u003eRugged vandal resistant lens\u003c\/li\u003e\n\u003cli\u003eSettings are adjustable without removing cover plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710901563495,"sku":"SWX-133-1-D-LA","price":131.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/BuytheSensorWorxSWX-133-1-D-LASWX-133.jpg?v=1714412372"},{"product_id":"sensorworx-swx-113-1-d-la-wall-switch-sensor-pir-daylight-detection-manual-on-0-10v-dimming-stand-alone-12-24v-light-almond","title":"SensorWorx SWX-113-1-D-LA Wall Switch Sensor - PIR - Daylight Detection - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-113-1-D-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-1-D-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePIR + daylight detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003cbr\u003e\u003cstrong\u003eManual On \/ Automatic Off operation:\u003c\/strong\u003e lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control: \u003c\/strong\u003ewhen coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-113-1-D-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Light Almond\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710905397351,"sku":"SWX-113-1-D-LA","price":104.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_light_almond_5.jpg?v=1714412275"},{"product_id":"sensorworx-swx-113-1-d-gy-wall-switch-sensor-pir-daylight-detection-manual-on-0-10v-dimming-stand-alone-12-24v-gray","title":"SensorWorx SWX-113-1-D-GY Wall Switch Sensor - PIR - Daylight Detection - Manual On - 0-10V Dimming - Stand Alone - 12-24V - Gray","description":"\u003ch1\u003eSensorWorx SWX-113-1-D-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-113-1-D-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePIR + daylight detection\u003c\/strong\u003e: sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Ambient daylight detection also ensures lights are held off in rooms with sufficient light contribution from windows or skylights.\u003cbr\u003e\u003cstrong\u003eManual On \/ Automatic Off operation:\u003c\/strong\u003e lights can also be switched off manually. This mode provides increased energy savings but requires the user to initially turn on the lights.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control: \u003c\/strong\u003ewhen coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-113-1-D-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Daylight Harvesting, Manual On, Stand Alone Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Gray\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003eSmall motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²\u003cbr\u003eLarge motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710916014183,"sku":"SWX-113-1-D-GY","price":104.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_gray_6.jpg?v=1714412648"},{"product_id":"sensorworx-swx-101-1-d-ms-wh-wall-switch-sensor-pir-auto-on-0-10v-dimming-multi-switch-sensor-12-24v-white","title":"SensorWorx SWX-101-1-D-MS-WH Wall Switch Sensor - PIR - Auto On - 0-10V Dimming - Multi-Switch \/ Sensor - 12-24V - White","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-MS-WH\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-D-MS-WH Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePassive infrared detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control: \u003c\/strong\u003ewhen coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-101-1-D-MS-WH\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: White\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710930268263,"sku":"SWX-101-1-D-MS-WH","price":117.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100-1-d_white_7.jpg?v=1714413258"},{"product_id":"sensorworx-swx-101-1-d-ms-iv-wall-switch-sensor-pir-auto-on-0-10v-dimming-multi-switch-sensor-12-24v-ivory","title":"SensorWorx SWX-101-1-D-MS-IV Wall Switch Sensor - PIR - Auto On - 0-10V Dimming - Multi-Switch \/ Sensor - 12-24V - Ivory","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-MS-IV\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-D-MS-IV Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePassive infrared detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation: \u003c\/strong\u003eIf lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-101-1-D-MS-IV\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Ivory\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710942523495,"sku":"SWX-101-1-D-MS-IV","price":117.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_ivory_6.jpg?v=1714413784"},{"product_id":"sensorworx-swx-101-1-d-ms-la-wall-switch-sensor-pir-auto-on-0-10v-dimming-multi-switch-sensor-12-24v-light-almond","title":"SensorWorx SWX-101-1-D-MS-LA Wall Switch Sensor - PIR - Auto On - 0-10V Dimming - Multi-Switch \/ Sensor - 12-24V - Light Almond","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-MS-LA\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-D-MS-LA Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePassive infrared detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control: \u003c\/strong\u003ewhen coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-101-1-D-MS-LA\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Light Almond\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710954614887,"sku":"SWX-101-1-D-MS-LA","price":117.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_light_almond_6.jpg?v=1714414191"},{"product_id":"sensorworx-swx-101-1-d-ms-gy-wall-switch-sensor-pir-auto-on-0-10v-dimming-multi-switch-sensor-12-24v-gray","title":"SensorWorx SWX-101-1-D-MS-GY Wall Switch Sensor - PIR - Auto On - 0-10V Dimming - Multi-Switch \/ Sensor - 12-24V - Gray","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-MS-GY\u003c\/h1\u003e\n\u003ch2\u003eSWX-101-1-D-MS-GY Product Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple and cost effective lighting control solution for many applications. Just like its line voltage counterpart, the low voltage SensorWorx 0-10V dimming wall switch sensor is designed with contractors in mind. Less than 1” deep, the unit is 25-40% shallower than typical dimmers and sensors, resulting in less crowded wall boxes. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003cbr\u003e\u003cstrong\u003ePassive infrared detection:\u003c\/strong\u003e sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting.\u003cbr\u003e\u003cstrong\u003eAutomatic On and Automatic Off operation:\u003c\/strong\u003e If lights are switched off manually, the Automatic On functionality is temporarily disabled to allow the occupant a few seconds to leave the room before returning to Automatic On operation. However, if the person remains in the space, the unit will stay in a manual on state until the switch is pressed again.\u003cbr\u003e\u003cstrong\u003eLow-voltage 12-24V operation and 0-10V dimming control:\u003c\/strong\u003e when coupled with auxiliary power packs (see ‘Frequently Bought Together’ products), these dimming sensor switches can dim as many fixtures as desired as each power pack can handle a load of 16 amps each.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003ePart Number: SWX-101-1-D-MS-GY\u003cbr\u003eOccupancy Sensor Type: Passive Infrared (PIR), Auto On, Multi-Switch \/ Sensor\u003cbr\u003eSwitch Type: Button\u003cbr\u003eInput Voltage: 12V, 12-24V, 24V\u003cbr\u003eDimmable: 0-10V\u003cbr\u003eDetection Zone: 180 Degrees\u003cbr\u003eSensor Coverage: 2,025 Sq Ft\u003cbr\u003eMin Operating Temp: 32 Degrees F\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eMade in USA: Yes\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eColor: Gray\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cp\u003eEnclosure is 25-40% shallower than other sensors (less than 1” depth into wallbox)\u003cbr\u003eUnique bat-wing shaped lens provides enhanced peripheral detection\u003cbr\u003eSelf-grounding mounting strap\u003cbr\u003eModern look and intuitive easy-tap button\u003cbr\u003eRugged vandal resistant lens\u003cbr\u003eSettings are adjustable without removing cover plate\u003cbr\u003eWall-to-wall passive infrared small motion detection\u003cbr\u003e100% passive detection methods – no interference potential from external devices\u003cbr\u003eConfigurable time delays and operating modes\u003cbr\u003eBlue locator LED when lights are off\u003c\/p\u003e\n\u003ch2\u003eAbout SENSORWORX:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":40710965526631,"sku":"SWX-101-1-D-MS-GY","price":117.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_gray_7.jpg?v=1714414536"},{"product_id":"sensorworx-swx-101-1-d-bk-wall-switch-sensor-with-pir-stand-alone-auto-on-0-10v-dimming-12-24v-finish-black","title":"SensorWorx SWX-101-1-D-BK Wall Switch Sensor With PIR - Stand Alone - Auto On - 0-10V Dimming - 12-24V - Finish: Black","description":"\u003ch1\u003eSensorWorx SWX-101-1-D-BK\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-BK \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: SWX-101-1-D-BK\u003cbr\u003eColor: Black\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: 32 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eAuto On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43858482430055,"sku":"SWX-101-1-D-BK","price":103.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100_d_bk_wfaceplate_7741fca3-5ab3-4024-b2fb-0e3facc6dec0.webp?v=1780942189"},{"product_id":"sensorworx-swx-101-1-d-rd-wall-switch-sensor-with-pir-stand-alone-auto-on-0-10v-dimming-12-24v-finish-red","title":"SensorWorx SWX-101-1-D-RD Wall Switch Sensor With PIR - Stand Alone - Auto On - 0-10V Dimming - 12-24V - Finish: Red","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-RD\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-RD \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-RD\u003c\/span\u003e\u003cbr\u003eColor: Red\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: 32 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eAuto On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43858484265063,"sku":"SWX-101-1-D-RD","price":106.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100_d_rd_wfaceplate_a2b88474-ae8e-43eb-a047-36470b51148a.webp?v=1780942354"},{"product_id":"sensorworx-swx-101-1-d-rd-he-wall-switch-sensor-with-pir-humid-environment-stand-alone-auto-on-0-10v-dimming-12-24v-finish-red","title":"SensorWorx SWX-101-1-D-RD-HE Wall Switch Sensor With PIR - Humid Environment - Stand Alone - Auto On - 0-10V Dimming - 12-24V - Finish: Red","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-RD-HE\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-RD-HE \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-RD-HE\u003c\/span\u003e\u003cbr\u003eColor: Red\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: -40 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eAuto On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003cbr\u003eHumid Environment\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43858485936231,"sku":"SWX-101-1-D-RD-HE","price":114.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100_d_rd_wfaceplate_a2b88474-ae8e-43eb-a047-36470b51148a.webp?v=1780942354"},{"product_id":"sensorworx-swx-101-1-d-bk-he-wall-switch-sensor-with-pir-humid-environment-stand-alone-auto-on-0-10v-dimming-12-24v-finish-black","title":"SensorWorx SWX-101-1-D-BK-HE Wall Switch Sensor With PIR - Humid Environment - Stand Alone - Auto On - 0-10V Dimming - 12-24V - Finish: Black","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-BK-HE\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-BK-HE \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-BK-HE\u003c\/span\u003e\u003cbr\u003eColor: Black\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: -40 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eAuto On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003cbr\u003eHumid Environment\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43858487214183,"sku":"SWX-101-1-D-BK-HE","price":111.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100_d_bk_wfaceplate_85a78e61-84eb-4c17-b763-c7f6e475adc9.webp?v=1780942591"},{"product_id":"sensorworx-swx-101-1-d-wh-he-wall-switch-sensor-with-pir-humid-environment-stand-alone-auto-on-0-10v-dimming-12-24v-finish-white","title":"SensorWorx SWX-101-1-D-WH-HE Wall Switch Sensor With PIR - Humid Environment - Stand Alone - Auto On - 0-10V Dimming - 12-24V - Finish: White","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-WH-HE\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-WH-HE \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-WH-HE\u003c\/span\u003e\u003cbr\u003eColor: White\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: -40 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eAuto On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003cbr\u003eHumid Environment\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43858498781287,"sku":"SWX-101-1-D-WH-HE","price":105.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100-1-d_white_b42ef6e3-dba1-4209-a668-45eae7187076.webp?v=1780942706"},{"product_id":"sensorworx-swx-101-1-d-la-he-wall-switch-sensor-with-pir-humid-environment-stand-alone-auto-on-0-10v-dimming-12-24v-finish-light-almond","title":"SensorWorx SWX-101-1-D-LA-HE Wall Switch Sensor With PIR - Humid Environment - Stand Alone - Auto On - 0-10V Dimming - 12-24V - Finish: Light Almond","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-LA-HE\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-LA-HE \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-LA-HE\u003c\/span\u003e\u003cbr\u003eColor: Light Almond\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: -40 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eAuto On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003cbr\u003eHumid Environment\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43858513985639,"sku":"SWX-101-1-D-LA-HE","price":105.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_light_almond_f5373aa3-4f9b-410c-8b6d-915f5807d6b1.webp?v=1780942795"},{"product_id":"sensorworx-swx-101-1-d-iv-he-wall-switch-sensor-with-pir-humid-environment-stand-alone-auto-on-0-10v-dimming-12-24v-finish-ivory","title":"SensorWorx SWX-101-1-D-IV-HE Wall Switch Sensor With PIR - Humid Environment - Stand Alone - Auto On - 0-10V Dimming - 12-24V - Finish: Ivory","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-IV-HE\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-IV-HE \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-IV-HE\u003c\/span\u003e\u003cbr\u003eColor: Ivory\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: -40 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eAuto On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003cbr\u003eHumid Environment\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43858524635239,"sku":"SWX-101-1-D-IV-HE","price":105.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_ivory_06e0618e-8bc2-467d-a013-104c9797df27.webp?v=1780942880"},{"product_id":"sensorworx-swx-101-1-d-gy-he-wall-switch-sensor-with-pir-humid-environment-stand-alone-auto-on-0-10v-dimming-12-24v-finish-gray","title":"SensorWorx SWX-101-1-D-GY-HE Wall Switch Sensor With PIR - Humid Environment - Stand Alone - Auto On - 0-10V Dimming - 12-24V - Finish: Gray","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-GY-HE\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-GY-HE \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-101-1-D-GY-HE\u003c\/span\u003e\u003cbr\u003eColor: Gray\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: -40 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eAuto On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003cbr\u003eHumid Environment\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43858534629479,"sku":"SWX-101-1-D-GY-HE","price":105.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx-100-1-d_gray_3491fdfe-7901-4cc6-8754-6ae5913f8b1b.webp?v=1780942968"},{"product_id":"sensorworx-swx-103-1-d-bk-wall-switch-sensor-with-pir-stand-alone-manual-on-0-10v-dimming-12-24v-finish-black","title":"SensorWorx SWX-103-1-D-BK Wall Switch Sensor With PIR - Stand Alone - Manual On - 0-10V Dimming - 12-24V - Finish: Black","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-103-1-D-BK\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-103-1-D-BK \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-103-1-D-BK\u003c\/span\u003e\u003cbr\u003eColor: Black\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: 32 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eManual On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43862314614887,"sku":"SWX-103-1-D-BK","price":103.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100_d_bk_wfaceplate_7741fca3-5ab3-4024-b2fb-0e3facc6dec0.webp?v=1780942189"},{"product_id":"sensorworx-swx-103-1-d-rd-wall-switch-sensor-with-pir-stand-alone-manual-on-0-10v-dimming-12-24v-finish-red","title":"SensorWorx SWX-103-1-D-RD Wall Switch Sensor With PIR - Stand Alone - Manual On - 0-10V Dimming - 12-24V - Finish: Red","description":"\u003ch1\u003eSensorWorx \u003cspan data-sheets-root=\"1\"\u003eSWX-103-1-D-RD\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003ch2\u003e\n\u003cspan data-sheets-root=\"1\"\u003eSWX-103-1-D-RD \u003c\/span\u003eProduct Description\u003c\/h2\u003e\n\u003cp\u003eThe SensorWorx family of wall switch occupancy\/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SensorWorx 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowded wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SensorWorx products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance.\u003c\/p\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cp\u003eBrand: SensorWorx\u003cbr\u003eSKU: \u003cspan data-sheets-root=\"1\"\u003eSWX-103-1-D-RD\u003c\/span\u003e\u003cbr\u003eColor: Red\u003cbr\u003eInput Voltage: 12-24V\u003cbr\u003eMin Operating Temp: 32 \u003cspan\u003eDegrees F\u003c\/span\u003e\u003cbr\u003eSpecial Features: B.A.A. Compliant\u003cbr\u003eWidth: 1.68\"\u003cbr\u003eHeight: 2.74\"\u003cbr\u003eManual On\u003cbr\u003eDimmable: \u003cspan\u003e0-10V\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eAbout SensorWorx:\u003c\/h2\u003e\n\u003cp\u003eSENSORWORX is a new brand of lighting controls that is redefining the occupancy sensor category. At the core of this claim is the incorporation of key innovations in three areas: Technology, Convenience, and Manufacturing Quality.\u003c\/p\u003e\n\u003cp\u003eSENSORWORX products are designed, produced, and sold by BLP Technologies, Inc. of Wallingford, Connecticut. Founded in 2017 by engineers with decades of experience in lighting controls, the team behind SENSORWORX has an unmatched resume of bringing high quality and innovative products to the lighting and building control marketplace. With particular expertise in occupancy sensing, BLP Technologies is uniquely qualified to make the SENSORWORX brand the new standard of quality and technology excellence.\u003cbr\u003e\u003c\/p\u003e","brand":"SensorWorx","offers":[{"title":"Default Title","offer_id":43862390571111,"sku":"SWX-103-1-D-RD","price":106.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/files\/swx_100_d_rd_wfaceplate_8b8214f7-742c-4a78-95ff-45f845830eb4.webp?v=1781017425"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0099\/0612\/6912\/collections\/swx_100_d_bk_wfaceplate_8bc45041-fae8-4679-9d81-a9ac11069320.webp?v=1794471679","url":"https:\/\/buyriteelectric.com\/collections\/sensorworx-low-voltage-12-24v-0-10v-dimming-switch-sensors.oembed","provider":"BuyRite Electric","version":"1.0","type":"link"}